Plan view
Drawn to scale · Dashed lines are under the worksurface
Fits the room. With seating clearance the pod needs 21'-0" × 16'-2". The 24'-0" × 18'-0" room leaves 3'-0" spare along the pod and 1'-10" across it.
- Drift Ash worksurface
- Harbor screen, 18"
- Legs, beam, pedestals
- Beam joint on a joint leg
- Base infeed, one per circuit
- Seating clearance and aisles
- Point at a line in the bill of materials to find it here
- Pod
- 6 positions, 3 bays back to back
- Worksurfaces
- 60" × 30", Drift Ash laminate
- Footprint
- 15'-0" × 5'-2"
- With clearance
- 21'-0" × 16'-2"
- Screens
- 18" high, Harbor fabric
- Power and data
- 1 per position, 2 circuits
- Storage
- Mobile pedestal
- Monitor arms
- 2 per position
How the engine worked it out
Footprint 15'-0" × 5'-2". 3 bays of 60" along the spine, and two 30" deep rows back to back with 2" between them for the screen and the beltline. That is 12.9 sq ft per position.
Spine beam in 2 segments. At 60" the stocked beams are 5'-0", 10'-0": whole bays, so a joint lands on a bay line. The longest is 10'-0", so the 15'-0" spine takes 10'-0" + 5'-0", with 1 splice over a joint leg.
2 feeds for 6 modules. A circuit is 80% of 20 A at 120 V, 1,920 W: 6 modules at 300 W, serving at most 4 positions. A bay has 2 positions and 2 modules, so the limit of 4 positions lets one circuit take 2 bays. 3 bays need 2 base infeeds; the beltline is 3 harnesses with 1 jumper.
23" deep pedestals. Pedestals are sized to the surface: a 30" deep top takes a 23" pedestal, which stands under the front edge and clears the spine beam.
Fits the room. With seating clearance the pod needs 21'-0" × 16'-2". The 24'-0" × 18'-0" room leaves 3'-0" spare along the pod and 1'-10" across it.
The clearance check is illustrative: 30" for a chair and a 36" aisle behind each row, and 36" aisles at the ends. It is not a building code, egress or accessibility determination.
Bill of materials
Every part the plan draws, counted by type and finish from the same layout. Point at a line to light those parts in the plan.
- Footprint
- 15'-0" × 5'-2"
- Per position
- 12.9sq ft
- With clearance, per position
- 56.6sq ft
- Clearance check
- Fits
Fits a 24'-0" × 18'-0" room. Pod with clearance: 21'-0" × 16'-2", 339.5 sq ft.
| Part | Size | Finish | Qty |
|---|---|---|---|
| Worksurfaces | |||
| Worksurface | 60" × 30" × 1" | Drift Ash laminate | 6 |
| Frame | |||
| Spine beam | 10'-0" | Alloy paint | 1 |
| Spine beam | 5'-0" | Alloy paint | 1 |
| Beam splice kit | At a joint leg | Alloy paint | 1 |
| End leg | 4'-10" foot | Alloy paint | 2 |
| Joint leg | 4'-10" foot | Alloy paint | 1 |
| Screens | |||
| Divider screen | 60" × 18" above the surface | Harbor fabric | 3 |
| Power and data | |||
| Power and data module | 2 simplex receptacles, 2 data ports | Black | 6 |
| Beltline harness | 60", 4-wire beltline harness | – | 3 |
| Jumper | Harness-to-harness jumper | – | 1 |
| Base infeed | Base infeed, 20 A circuit, from a floor box | – | 2 |
| Storage | |||
| Mobile pedestal | 15" × 23", box/box/file, lock | Drift Ash fronts, alloy paint body | 6 |
| Accessories | |||
| Monitor arm | Single screen, clamp mount | Alloy paint | 12 |
Totals by finish
| Finish | Pieces | Parts |
|---|---|---|
| Drift Ash laminate | 6 | Worksurface |
| Alloy paint | 18 | Spine beam, Beam splice kit, End leg, Joint leg, Monitor arm |
| Harbor fabric | 3 | Divider screen |
| Black | 6 | Power and data module |
| Drift Ash fronts, alloy paint body | 6 | Mobile pedestal |
Square feet per position is the footprint divided by the positions; with clearance it adds the chair zones and aisles. The clearance check is illustrative: 30" for a chair and a 36" aisle behind each row, and 36" aisles at the ends. It is not a building code, egress or accessibility determination.